LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Instrument Cluster - Symptoms >> Symptom: HIGH BEAM INDICATOR OUTPUT OPEN >> When Monitored And Set Condition:

When Monitored And Set Condition:

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: With the CTM Awake.

Set Condition: The CTM detects 0 (zero) volts on the High Beam Indicator circuit when the ignition is on and the Headlamp Switch is in the off position.

NOTE: High Beam Headlamps will operate. The indicator will be inoperative.
scientia non olet · About LEMON Manuals