Standard Procedure- Refrigerant System Charge
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
After the refrigerant system has been tested for leaks and evacuated, a refrigerant charge can be injected into the system. See SPECIFICATIONS for the proper amount of the refrigerant charge.
A R-134a refrigerant recovery/recycling/charging station that meets SAE Standard J2210 must be used to charge the refrigerant system with R-134a refrigerant. Refer to the operating instructions supplied by the equipment manufacturer for the proper care and use of this equipment.
The R-134a refrigerant system charge capacity for this vehicle is: 0.907 kilograms (32 ounces).