Standard Procedure - Refrigerant System Charge
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE FOLLOWING OPERATION. (Refer to
WARNING
) (Refer to
CAUTION
)
After the refrigerant system has been tested for leaks and evacuated, a refrigerant charge can be injected into the system (Refer to SPECIFICATIONS ).
A R-134a refrigerant recovery/recycling/charging station that meets SAE Standard J2210 must be used to charge the refrigerant system with R-134a refrigerant. Refer to the operating instructions supplied by the equipment manufacturer for proper care and use of this equipment.