LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (HVAC - Airflow Distribution) >> HVAC Housing >> Installation >> Installation- HVAC Housing Plenum Adapter

Installation- HVAC Housing Plenum Adapter

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heater-A/C housing plenum adapter to the plenum panel opening, be certain that the snap features on each side of the adapter are fully engaged with the sides of the plenum panel opening. This must be a water tight connection to prevent leaks.
  2. Install the plenum adapter to the plenum panel.
  3. Push upwards sharply and firmly on the opposite side of the plenum adapter to disengage the snap feature to the plenum opening.
  4. Slide the heater-A/C housing plenum adapter onto the plenum opening.
  5. Install the heater-A/C housing to the vehicle (Refer to INSTALLATION- HVAC HOUSING  ).
scientia non olet · About LEMON Manuals