LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (HVAC - Airflow Distribution) >> Blower Motor >> Installation

Blower Motor: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the blower motor and wheel assembly inside the HVAC housing.
  2. Install the three screws that secure the blower motor, air spoiler, and wheel assembly to the heater-A/C housing. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Plug blower motor connections together.
  4. Install lower right kick panel (Refer to INSTALLATION ).
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals