LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Conditioning Controls) >> Evaporator Temperature Sensor >> Installation

Evaporator Temperature Sensor: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the evaporator temperature sensor to the evaporator.
  2. Connect the evaporator temperature sensor lead to the wiring harness.
  3. Install the evaporator temperature sensor panel to the HVAC housing. Be sure to install the panel seal if seal is damaged replace as required.
  4. Reinstall the battery negative cable to the battery.
scientia non olet · About LEMON Manuals