LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Conditioning Controls) >> Blend Door Actuator >> Installation

Blend Door Actuator: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive shaft to the blend air door.
  2. Install the blend actuators to the distribution housing. Tighten the mounting screws to 2 N.m (17 in. lbs.).
  3. Connect the HVAC wire harness connector for the blend door actuator to the actuator connector receptacle.
  4. Roll the Instrument Panel Assembly back into position (Refer to INSTALLATION ).
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals