LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Conditioning Controls) >> Ambient Temp Sensor >> Installation

Ambient Temp Sensor: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ambient temperature sensor onto the radiator yoke.
  2. Install and tighten the one screw that secures the ambient temperature sensor bracket to the radiator yoke. Tighten the screw to 5.6 N.m (50 in. lbs.).
  3. Reconnect the wire harness connector to the ambient temperature sensor connector receptacle.
  4. Reconnect the battery negative cable.
    Fig 1: Removing And Installing Ambient Temperature Sensor
    G02655882Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals