LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Conditioning Controls) >> A/C Pressure Transducer >> Removal

A/C Pressure Transducer: Removal

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Unplug the wire harness connector from the A/C pressure transducer, which is mounted to a fitting on the liquid line between the condenser and the high side service port.
  3. Unscrew the A/C pressure transducer from the discharge line fitting.
  4. Remove the A/C pressure transducer from the vehicle.
  5. Remove the O-ring seal from the discharge line fitting and discard.
scientia non olet · About LEMON Manuals