LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Conditioning Controls) >> A/C Heater Control >> Installation

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug the wire harness connector into the back of the heater-A/C control.
  2. Position the a/c heater control in the instrument panel cluster bezel.
  3. Install the fastener screws and tighten to 2.2 N.m (17 +/-3 in. lbs.).
  4. Install the cluster bezel in the instrument panel (Refer to INSTALLATION ).
  5. Connect the battery negative cable.
  6. Perform A/C cool down test with DRB III.
scientia non olet · About LEMON Manuals