Roof Rail Weatherstrip/Retainer: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The screws attaching the retainer to the roof are coated with wax to prevent water leakage. If the retainer has been removed from the roof, replace the screws.
- Using Mopar(R) Super Clean or equivalent, ensure the area where tape secures the weatherstrip is clean.
- Position retainer on vehicle.
- Install screws attaching retainer to roof rail.
- Starting at the forward end of retainer, push weatherstrip on until seated.
- Peel the backing from the rearward end of the weatherstrip and press to secure.