LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Weatherstrip/Seals) >> Front Door Weatherstrip >> Installation

Front Door Weatherstrip: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the weatherstrip on the pinch flange around door opening and press into place.
  2. Press into place B-pillar trim/quarter panel trim.
  3. Install upper turning loop anchor bolt.
  4. Install the door sill trim. (Refer to INSTALLATION )
  5. Install cowl trim panel. (Refer to INSTALLATION )
  6. Install A-pillar trim. (Refer to INSTALLATION )