LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Back-Rear/Club Cab >> Installation

Seat Back-Rear/Club Cab: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rear seat back in vehicle.
  2. Position rear seat belt/buckle in the retaining loops.
  3. Position seat back at cab back panel, align retaining tabs and lift seat back upward to secure seat back.
  4. Secure cab back bolster assembly by aligning upper bolster assembly push pins with holes in cab back sheetmetal and pushing rearward.
    Fig 1: Installing Seat Belt/Buckle
    G02655782Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals