LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Back Cushion / Cover-Front Bucket >> Removal

Seat Back Cushion / Cover-Front Bucket: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position seat in full forward position.
  2. If equipped, remove seat release handle on rear of seat back.
  3. Disengage J-strap at base of seat back.
  4. Using a trim stick C-4755 or equivalent, carefully pry off lumbar handle.
  5. Pull the cover upward.
  6. Separate pad from seat back frame.
scientia non olet · About LEMON Manuals