LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Seat Back Cushion / Cover-Front Bucket >> Installation

Seat Back Cushion / Cover-Front Bucket: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position pad on seat back frame.
  2. Position cover on top of the seat and then pull it downward.
  3. Position lumbar handle on lumbar adjuster and press into place.
  4. Engage J-straps at base of seat back.
  5. If removed, install seat release handle on rear of seat back.
scientia non olet · About LEMON Manuals