Removal-Center Armrest/Console Latch
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Place the armrest/console in the down position.
- Open the armrest/console lid and remove the two screws attaching the latch bezel cover and remove the latch cover bezel and the latch button (Figure ).
- Using a drill stop, and protecting the surrounding trim and upholstery, drill the heads off the two rivets holding the latch to the armrest/console. Do not penetrate the latch bracket.
- Remove the latch assembly.
- Using the correct size drill bit, remove the remaining portion of the rivet.