Installation-Center Armrest Upper Inertia Latch Cover
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Install the upper latch cover onto the upper latch inertia arm. Ensure the check strap loops under the stud on the side of the lower stanchion/post.
- Install the lower latch cover onto the inertia latch upper arm working it around the latch bracket.
- Align the lower latch cover, the upper latch cover, and the latch bracket to the screw hole on the arm.
- Secure the cover with the screw.
- Cycle the armrest through a full range of travel and check for freedom of movement. Adjust the latch covers as necessary.