LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Seats) >> Center Console Lid >> Removal

Center Console Lid: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hinge pivot bolt.
  2. Remove the left upper hinge bracket cover. (Figure )
  3. Remove the torx screws attaching the left hinge bracket to the console lid/seat back.
  4. Peel back the right pivot bracket cover and carefully pry the pivot from the pivot bracket (Figure ).
  5. Separate the console lid/seat back from the seat cushion.
scientia non olet · About LEMON Manuals