LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Interior Trim) >> Quarter Trim Panel >> Installation

Quarter Trim Panel: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position trim panel in vehicle.
  2. Route belt webbing through access slots in quarter trim panel.
  3. Position quarter trim panel on quarter panel and engage hooks at base of quarter trim panel.
  4. Press quarter trim panel inward to seat push-in fasteners.
  5. Install screws attaching quarter trim panel to cab back panel.
  6. Install cab back panel trim. (Refer to BODY/INTERIOR/REAR CAB BACK PANEL TRIM-INSTALLATION  )
  7. Install door sill cover as necessary.
scientia non olet · About LEMON Manuals