Air EXHAUSTER-Cab: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Remove cab back panel. (Refer to BODY/INTERIOR/REAR CAB BACK PANEL TRIM-INSTALLATION )
Using a trim stick C-4755 or equivalent, between cab and cargo box, depress air exhauster upper retaining tabs and disengage from cab back panel.
From inside the vehicle separate air exhauster from cab back panel (Fig 1 ).

Fig 1: Removing/Installing In Cab Air Exhausters
Courtesy of DAIMLERCHRYSLER CORP.