Removal - Passenger Side

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Using a trim stick C-4755 or equivalent, gently pry around the perimeter of the passenger side end cap to disengage each of the snap clips from their receptacles in the instrument panel base trim (Fig 2 ).

Fig 1: Removing/Installing End Cap
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Removing/Installing End Cap - Typical
Courtesy of DAIMLERCHRYSLER CORP.
Remove the end cap from the end of the instrument panel.