LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Exterior) >> Wheel Opening Molding >> Removal

Wheel Opening Molding: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws attaching the wheel opening molding to the fender (Figure ).
  2. Separate the molding from the wheel opening.
scientia non olet · About LEMON Manuals