LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Exterior) >> Wheel Opening Molding >> Installation

Wheel Opening Molding: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean body surface with Mopar(R) Super Kleen solvent or equivalent. Wipe surface dry with lint free cloth.
  2. Position the molding in the wheel opening.
  3. Remove the backing and press to secure molding.
  4. Install the screws attaching the wheel opening molding to the fender.
scientia non olet · About LEMON Manuals