LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Exterior) >> Roof Joint Molding >> Removal

Roof Joint Molding: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm the roof joint molding and roof panel to approximately 38°C (100°F) using a suitable heat lamp or heat gun.
  2. Pull molding from roof joint.
scientia non olet · About LEMON Manuals