Window Regulator: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Position the window regulator in the door.
- Install the fasteners attaching the regulator to the inner door panel.
- Engage the regulator wire harness.
- Lower the glass manually and install the bolts attaching the regulator to the glass.
- Cycle the glass to ensure correct operation.
- Install the outer beltline weatherstrip. (Refer to INSTALLATION )
- Install the inner beltline weatherstrip. (Refer to INSTALLATION )
- Install the door waterdam and radio speaker, if equipped. (Refer to BODY/DOORS-REAR/WATERDAM-INSTALLATION )