Door Glass: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the glass into the door.
- Install the front glass weatherstrip and the quarter glass trim.
- Raise the glass manually and secure in the door frame.
- Install the front lower glass channel. (Refer to BODY/DOORS-REAR/GLASS RUN CHANNEL-INSTALLATION )
- Lower the glass, install the regulator bolts and tighten to 9 N.m (80 in. lbs.).
- Cycle the glass to ensure proper operation.
- Install the outer belt weatherstrip. (Refer to INSTALLATION )
- Install the inner belt weatherstrip. (Refer to INSTALLATION )
- Install the waterdam. (Refer to BODY/DOORS-REAR/WATERDAM-INSTALLATION )