LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Door - Front) >> Latch Striker >> Removal

Latch Striker: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a grease pencil or equivalent, mark the position of the striker on the B-pillar.
  2. Remove the screws attaching the striker and spacer to the B-pillar (Fig 1 ).
  3. Separate the striker from the B-pillar.
    Fig 1: Removing Screws Attaching Striker And Spacer To B-Pillar
    G02655680Courtesy of DAIMLERCHRYSLER CORP.