Section 63 (Door - Front): Door: Removal
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Open door.
- Using a grease pencil or equivalent, mark the outline of the door hinges on the door end to aid installation.
- Remove protective boot from door wire harness connector.
- Disengage door wire harness connector.
- Support door on a suitable lifting device.
- While holding the door steady on lift, remove bolts and nuts attaching upper and lower door hinge to door end (Fig 1 ).
- Separate door from vehicle.