LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Tires & Wheels) >> Tires/Wheels >> Diagnosis And Testing - Tire And Wheel RUNOUT >> Method 1 (Relocate Wheel On Hub)

Method 1 (Relocate Wheel On Hub)

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive vehicle a short distance to eliminate tire flat spotting from a parked position.
  2. Check wheel bearings and adjust if adjustable or replace if necessary.
  3. Check the wheel mounting surface.
  4. Relocate wheel on the mounting, two studs over from the original position.
  5. Tighten wheel nuts until all are properly torqued, to eliminate brake distortion.
  6. Check radial runout. If still excessive, mark tire sidewall, wheel, and stud at point of maximum runout and proceed to Method 2.
scientia non olet · About LEMON Manuals