Lower Housing
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate valves, springs, and the housing valve and plug bores with clean transmission fluid (Figure).
- Install 3-4 timing valve spring and valve in lower housing.
- Install 3-4 quick fill valve in lower housing.
- Install 3-4 quick fill valve spring and plug in housing.
- Install timing valve end plate. Tighten end plate screws to 4 N.m (35 in. lbs.) torque.