Throttle Pressure Adjustment
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Insert Gauge Tool C-3763 between the throttle lever cam and the kickdown valve stem (Fig 1).
Push the gauge tool inward to compress the kickdown valve against the spring and bottom the throttle valve.
Maintain pressure against kickdown valve spring. Turn throttle lever stop screw until the screw head touches throttle lever tang and the throttle lever cam touches gauge tool.
NOTE:
The kickdown valve spring must be fully compressed and the kickdown valve completely bottomed to obtain correct adjustment.