LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Overhaul - 46RE Automatic Transmission) >> Torque Converter >> Removal

Torque Converter: Removal

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transmission and torque converter from vehicle.
  2. Place a suitable drain pan under the converter housing end of the transmission.
    CAUTION: Verify that transmission is secure on the lifting device or work surface, the center of gravity of the transmission will shift when the torque converter is removed creating an unstable condition. The torque converter is a heavy unit. Use caution when separating the torque converter from the transmission.
  3. Pull the torque converter forward until the center hub clears the oil pump seal.
  4. Separate the torque converter from the transmission.
scientia non olet · About LEMON Manuals