LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Overhaul - 46RE Automatic Transmission) >> Overdrive Unit >> Assembly >> Overdrive Piston

Overdrive Piston

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install new seals on overdrive piston.
  2. Stand transmission case upright on bellhousing.
  3. Position Guide Ring 8114-1 on outer edge of overdrive piston retainer.
  4. Position Seal Guide 8114-3 on inner edge of overdrive piston retainer.
  5. Install overdrive piston in overdrive piston retainer by:
    1. Aligning locating lugs on overdrive piston to the two mating holes in retainer.
    2. Lubricate overdrive piston seals with Mopar® Door Ease, or equivalent.
    3. Install piston over Seal Guide 8114-3 and inside Guide Ring 8114-1.
    4. Push overdrive piston into position in retainer.
    5. Verify that the locating lugs entered the lug bores in the retainer.
  6. Install intermediate shaft spacer on intermediate shaft.
  7. Install overdrive piston thrust plate on overdrive piston.
  8. Install overdrive piston thrust bearing on overdrive piston.
  9. Install transmission speed sensor and O-ring seal in overdrive case.
scientia non olet · About LEMON Manuals