Transfer Plate

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Install rear clutch and rear servo check balls in transfer plate (Fig 1).

Fig 1: Identifying Rear Clutch And Rear Servo Check Ball Locations
Courtesy of DAIMLERCHRYSLER CORP.
Install filter screen in upper housing separator plate (Fig 2).

Fig 2: Identifying Separator Plate Filter Screen
Courtesy of DAIMLERCHRYSLER CORP.
Align and position upper housing separator plate on transfer plate (Fig 3).

Fig 3: Installing Brace Plate
Courtesy of DAIMLERCHRYSLER CORP.
Install brace plate (Fig 3). Tighten brace attaching screws to 4 N.m (35 in. lbs.) torque.
Install remaining separator plate attaching screws. Tighten screws to 4 N.m (35 in. lbs.) torque.