LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Overhaul - 42RE Automatic Transmission) >> Front Clutch >> Disassembly

Front Clutch: Disassembly

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove waved snap-ring and remove pressure plate, clutch plates and clutch discs (Fig 1).
    Fig 1: Exploded View Of 42RE Front Clutch Components
    G02657630Courtesy of DAIMLERCHRYSLER CORP.
  2. Compress clutch piston spring with Compressor Tool C-3575-A (Fig 2). Be sure legs of tool are seated squarely on spring retainer before compressing spring.
    Fig 2: Compressing Front Clutch Piston Spring
    G02657631Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove retainer snap-ring and remove compressor tool.
  4. Remove spring retainer and clutch spring. Note position of retainer on spring for assembly reference.
  5. Remove clutch piston from clutch retainer. Remove piston by rotating it up and out of retainer.
  6. Remove seals from clutch retainer piston bore and clutch retainer hub. Discard both seals as they are not reusable.
scientia non olet · About LEMON Manuals