LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Power Steering Pump) >> Fluid Cooler >> Installation

Fluid Cooler: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cooler.
  2. Install the cooler mounting nut and bolt.
  3. Reconnect the return hose at the cooler.
  4. Remove the support and lower the vehicle.
  5. Reconnect the return hose at the pump.
  6. Refill the power steering system, (Refer to STANDARD PROCEDURE-POWER STEERING PUMP-INITIAL OPERATION  ).
scientia non olet · About LEMON Manuals