LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Frame & Bumpers) >> Rear Bumper >> Removal

Rear Bumper: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support rear bumper on a suitable lifting device.
  2. Remove bolts attaching inner bumper brackets to frame rails (Fig 1 ).
    Fig 1: Removing Bolts Attaching Inner Bumper Brackets To Frame Rails
    G02657241Courtesy of DAIMLERCHRYSLER CORP.
  3. Disengage license plate lamp wire connector from body wire harness, if equipped.
  4. Separate rear bumper from vehicle.