Frame Fasteners
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Bolts, nuts and rivets can be used to repair frames or to install a reinforcement section on the frame. Bolts can be used in place of rivets. When replacing rivets with bolts, install the next larger size diameter bolt to assure proper fit. If necessary, ream the hole out just enough to sufficiently receive the bolt.
Hardened conical-type washers are preferred over the split-ring type lock washers. Grade-8 bolts are recommended for frame repair. Grade-3 and grade-5 bolts or softer should not be used. Tighten bolts/nuts with the correct torque, and (Refer to SPECIFICATIONS - TORQUE ) for tightening information.