LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Exhaust System) >> Heat Shields >> Installation

Heat Shields: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heat shields to the floor pan or the frame and install the screws and/or nuts.
  2. Tighten the nuts and/or screws to specification. Refer to SPECIFICATIONS  for correct torque values.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals