Rear Mount: Removal: 4WD

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative cable from the battery.
Raise the vehicle on a hoist.
Support the transmission with a transmission jack.
Remove stud nuts holding the insulator to the crossmember (Fig 1).

Fig 1: Installing Rear Insulator-4WD Vehicles
Courtesy of DAIMLERCHRYSLER CORP.
Raise rear of transmission SLIGHTLY.
Remove bolts holding the insulator to the insulator bracket (Fig 1). Remove the insulator.