LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine - 5.9L) >> Oil Pump >> Assembly

Oil Pump: Assembly

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pump rotors and shaft, using new parts as required.
  2. Position the oil pump cover onto the pump body. Tighten cover bolts to 11 N.m (95 in. lbs.) torque.
  3. Install the relief valve and spring. Insert the cotter pin.
  4. Tap on a new retainer cap.
  5. Prime oil pump before installation by filling rotor cavity with engine oil.
scientia non olet · About LEMON Manuals