LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine - 5.9L) >> Oil Pan >> Removal >> 2WD

Oil Pan: Removal: 2WD

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative cable from the battery.
  2. Remove engine oil dipstick.
  3. Disconnect distributor cap and position away from cowl.
  4. Raise vehicle.
  5. Drain engine oil.
  6. Remove engine mount insulator through bolts.
  7. Raise engine by way of oil pan using a block of wood between the jack and oil pan.
  8. When engine is high enough, place mount through bolts in the engine mount attaching points on the frame brackets.
  9. Lower engine so bottom of engine mounts rest on the replacement bolts placed in the engine mount frame brackets.
  10. Remove oil pan and one-piece gasket.
scientia non olet · About LEMON Manuals