LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine - 5.9L) >> Intake/Exhaust Valves & Seats >> Removal

Intake/Exhaust Valves & Seats: Removal

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cylinder head (Refer to ENGINE/CYLINDER HEAD-REMOVAL ).
  2. Compress valve springs using Valve Spring Compressor Tool MD-998772A and adapter 6716A.
  3. Remove valve retaining locks, valve spring retainers, valve stem seals and valve springs.
  4. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides. Identify valves to ensure installation in original location.
scientia non olet · About LEMON Manuals