LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine - 5.9L) >> Cylinder Head Cover(S) >> Installation

Cylinder Head Cover(S): Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. The cylinder head cover gasket can be used again. Install the gasket onto the head rail.
  2. Position the cylinder head cover onto the gasket. Tighten the bolts to 11 N.m (95 in. lbs.) torque.
  3. Install closed crankcase ventilation system and evaporation control system.
  4. Connect the spark plug wires to the spark plugs.
  5. Connect the negative cable to the battery.
scientia non olet · About LEMON Manuals