LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine - 4.7L) >> Rear Mount >> Installation

Rear Mount: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow the removal procedure in the reverse order.
  2. Tighten the through bolt retaining nut to 101 N.m (75 ft. lbs.).
  3. Tighten the isolator bracket to transmission retaining bolts (Manual transmission and 4x2 automatic transmission only) to 68 N.m (50 ft. lbs.).
  4. Tighten the mount bracket to transmission retaining bolts (4x4 automatic transmission only) to 68 N.m (50 ft. lbs.).
  5. Tighten the isolator mount to crossmember retaining nuts (Manual transmission and 4x2 automatic transmission only) to 41 N.m (30 ft. lbs.).
  6. Tighten the mount bracket to crossmember retaining bolts (4x4 automatic transmission only) to 28 N.m (250 in. lbs.).
scientia non olet · About LEMON Manuals