LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine - 4.7L) >> Cylinder Head >> Inspection

Cylinder Head: Inspection

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the cylinder head for out-of-flatness, using a straightedge and a feeler gauge. If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.
  2. Inspect the valve seats for damage. Service the valve seats as necessary.
  3. Inspect the valve guides for wear, cracks or looseness. If either condition exist, replace the cylinder head.
scientia non olet · About LEMON Manuals