LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine - 3.9L) >> Front Mount >> Installation >> 2WD

Front Mount: Installation: 2WD

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the engine raised SLIGHTLY, position insulator assembly onto the engine block and install bolts. Tighten the bolts to 41 N-m (30 ft. lbs.) torque.
  2. Lower engine with lifting fixture while guiding insulator assembly into the engine insulator bracket.
  3. Install insulator to bracket thru-bolt. Tighten the thru-bolt nut to 68 N-m (50 ft. lbs.) torque.
  4. Remove lifting fixture.
  5. Connect the negative cable to the battery.
scientia non olet · About LEMON Manuals