LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine - 3.9L) >> Cylinder Head Cover(S) >> Installation

Cylinder Head Cover(S): Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

A steel-backed silicone gasket is used with the cylinder head cover (Figure ). This gasket can be used again.

  1. Position the cylinder head cover gasket onto the head rail.
  2. Position the cylinder head cover onto the gasket and install the bolts. Tighten the bolts to 11 N.m (95 in. lbs.) torque.
  3. Install closed crankcase ventilation system and evaporation control system.
  4. Connect the negative cable to the battery.
  5. Start engine and check for leaks.
scientia non olet · About LEMON Manuals