LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Wiper System & Washer System) >> Washer Nozzle >> Installation

Washer Nozzle: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. From the top of the cowl plenum cover/grille panel, position the nipple end of the washer nozzle through the mounting hole and engage the anti-rotation tab of the nipple into the anti-rotation notch in the mounting hole (Figure ).
  2. Using hand pressure, push firmly and evenly on the top of the washer nozzle until the integral snap features lock into place on the underside of the cowl plenum cover/grille panel.
  3. From the underside of the cowl plenum cover/grille panel, reconnect the washer hose to the barbed nipple of the washer nozzle.
  4. Reinstall the washer hose for the washer nozzle into its routing clips on the underside of the cowl plenum cover/grille panel.
  5. Reinstall the cowl plenum cover/grille panel over the cowl plenum. (Refer to COWL GRILLE ).
  6. Close and latch the hood.
  7. Reinstall both wiper arms onto the wiper pivots. (Refer to WIPER ARM  ).
scientia non olet · About LEMON Manuals