LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Wiper System & Washer System) >> Check Valve >> Removal

Check Valve: Removal

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms from the wiper pivots. (Refer to WIPER ARM  ).
  2. Remove the cowl plenum cover/grille panel from the top of the cowl plenum. (Refer to COWL GRILLE ).
  3. From the underside of the cowl plenum cover/grille panel, disconnect the washer hoses from the three barbed nipples of the Wye fitting/check valve unit (Fig 1 ).
    Fig 1: Removing/Installing Check Valve/Washer Nozzle
    G02656774Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the Wye fitting/check valve unit from the underside of the cowl plenum cover/grille panel.
scientia non olet · About LEMON Manuals